Miscellaneous
Showing all 14 products
Contactors
Model: CON
Contactors allow a thermostat or other switching device to switch loads greater than its normal capacity.
Control switch for BN Thermic fan heaters
Model: CS-7
A 3 Way switch that provides On / Off / High / Low and Fan only Options. This switch is designed specifically for use with our 800, SCH, SMH, CA and RH fan heater ranges.
Control switch for single lamp halogen heater
Model: CS-4
A high specification switch that will switch up to 3kW (13A). This is commonly used to switch our 1.5kW, 2kW and 3kW Quartz Halogen Heaters or 1.5kW and 3kW Ceramic Heaters.
Control switch for three lamp halogen heater
Model: CS-3
A simple switch that controls individual lamps in our 4.5 and 6kW range of quartz halogen heaters. Down rating a heater’s output in warmer months is economic and more comfortable.
Control switch for two lamp halogen heater
Model: CS-2
A simple switch that controls individual 1.5kW lamps in our HN3-30(M) and HN3-30B(M) model quartz halogen heaters. Switching to half heat in warmer months is economic and more comfortable.
Dimmer Switch
Model: VR-2
A 13A surface mount weatherproof dimer designed for adjusting the output of our shortwave quartz halogen heaters or ceramic heaters. They provide adjustment from 30% to 100% of heater output with a ‘click’ to off.
Fan Speed Regulator (Not suitable for use with DSU3-25 & DSU3-45)
Model: DSU-2R
A fan speed regulator used to control the air velocity on our destratification units. This controller provides speed adjustment from 30 to 100% and has a click to ‘off’.
Relay Box 26A
Model: RB26
A 26A relay box that is often used as a quieter alternative to a contactor. Ideal for use with underfloor heating controllers.
Rotary controller for HC2 and HC3 control panels
Model: HC-C1
A switch that provides manual adjustment of heat intensity when using HC control panels.
Rotary controller timer push button for use with the HC-C1
Model: HC-B
A push button run down timer that is used with our HC-C1 controller.
Six gang switch for multiple halogen heater control
Model: CS-6
A 6 gang switch that is used to control multiple shortwave quartz halogen heaters. It can be used as for on/off control or to control individual lamps.
Soft Start Relay
Model: SSR
A 6kw soft start relay that is often used to switch our shortwave quartz halogen heaters. Only for use with zero volt devises. Avoids contact welds and prolongs lamp life.
